新闻中心/News Center
Daily use of cooling towers should pay attention to what
Release date：2014/11/6
1. Before use right out of the water pipes, tanks full flush, eliminating the tower garbage to prevent pipe blockage.
2. Each component connection bolts, especially transmission components (fans, motors, rotating water distributor), you must eleven tighten.
3. Gear oil level is normal, belt reducer belt tensioner should.
4. Blades rotating flexible, no bump on the housing.
5. When the fan working, looking down from the top should be clockwise, upward ventilation.
6. Cooling towers should immediately stop any abnormal sound, comprehensive examination until troubleshooting.
7. After the fan to work and open the valve, while adjusting the pump flow, into the tower pressure, current, voltage, vibration, noise level should be within the specified range.
8. Found that water distributor does not turn or uneven water distribution, should downtime.
9. Recycled water should be tap water or clean water, not containing oil and impurities, turbidity of not more than 50mmg / l.
10. Cooling tower as an important cooling equipment, there should be someone responsible for the management, make out of the water temperature related to the cooling tower, traffic, meteorological parameters
Record.
