Cooling tower body is made of high quality fiberglass from the surface by gel coat resin, with anti-aging, corrosion resistance, bright and clean, no leg color and other characteristics.
FL Square-shape Counter-flow Cooling Tower :
1、Tower design advanced level in the 1990s with the same period abroad.
2、Tower body surface using gel coat resin, with anti-aging, corrosion resistance, do not fade and so on.
3、Galvanized steel support tower technology, plus anti-corrosion paint, corrosion resistance particularly strong.
C2000 Rectangle-shape Cross-flow Cooling Tower :
1、Tower design advanced level in the 1990s with the same period abroad.
2、Tower body surface using gel coat resin, with anti-aging, corrosion resistance, do not fade and so on.
3、Galvanized steel support tower technology, plus anti-corrosion paint, corrosion resistance particularly strong.
HE2000 Cross-flow Closed Cooling Tower :
A. The coil made of oval-shaped copper tubes , which allow tower get high efficiency on air side
B. Counter-flow configures may the tower keep from the sun shining and alage growth.
C. Fresh air is countered with the hot liquid in surface of coil-tube , so the heat exchange efficiency is higher.
D. The material of coil-tube is reddish-copper , nominal design pressure over 1.0mpa, the liquid in tube can be keep clean all the time.
E. The patented modular structuret make the cooler easy to clean and link.
F. The all kinds material of the tower are purchased from famous manufacturer , service life of tower over 15 years.
G. Good water distributor result in better heat transfer performance.
H. Adopt al-alloy axial fan , the velocity of exhause air is higher , so the tower can be keep from air backflow . All fans are throught static and dynamic balance test ,it runs smoothly and silently.
I. Whole red-copper heat exchanger is most suit for the place where the density of fly ash is higher than normal.
HE3000 Cross-flow Closed Cooling Tower :
A. The coil of cooler with pre-cooling fill can get high efficiency on air side.
B. Cross-flow configures ,the height of tower is decreased , it have a well harmonious characteristics with surrounding buildings.
C. Fresh air is counted with the hot liquid in surface of coil-tube , so the heat exchange efficiency is higher.
D. The material of coil-tube is reddish-copper , nominal design pressure over 1.0mpa,the liquid in tube can be keep clean all the time.
E. The patented modular structure makes the cooler easy to clean and link.
F. The all kinds material of the tower are purchased from famous manufacturer , service life of tower over 15 years.
G. Lower pressure water distributing system made the water spray smoothly with lower pumping head .
H. Adopt al-alloy axial fan , the velocity of exhaust air is higher , so the tower can be keep from air Backflow . All fans are through static and dynamic balance test , it runs smoothly and silently.
I. Whole red-copper heat exchanger is most suit for the place where the density of fly ash is higher than normal.
SE3000 Combine-flow cooling Tower :
SE3 series closed cooling tower maximize its airside wet surface to realize the highest exchange efficiency the hot liquid circuiting in tube of the cooler transfer waste heat to wall of copper tube , the fan mounted on top of the tower suck cold air from louver and chamber of water distributor ,cold air directly contact spraying water in exchanger and packing segment, some water is evaporating and the spraying water become cold .the cold spraying water wet the wall of tube ,absorbing the heat of the wall from liquid in side of cooler, thus the temperature of liquid is down.
DACH/V Fin-tube Air Cooler :
DACH/VFin-tube Air Cooler With air as the cooling medium, ACROSS finned tube so that the tube cooled high-temperature process fluids or condensing equipment. Apply to water shortage areas, less environmental pollution.
>
SFWT Water Tank and Water Treament Devices :
SFWT Water Tank and Water Treament Devices the new tank is currently widely used internationally. Its unique properties to solve the concrete water tank weight, easy to leakage, easy to grow moss and easily corroded steel tanks and rust coating for water pollution and other issues.
