|
|
If you're looking to reduce energy use, reduce operating costs, process cooling systems to provide clean water, heat treatments of the new hybrid fluid coolers is exactly what you need.
Most of the fluid cooler is a closed-loop heat exchanger using ambient air cooling process water. Thermal treatments mixed fluid cooler with a unique insulation designed to provide water temperature, and the traditional evaporative cooling tower system to realize an annual temperature range is similar.
Operational savings
Thermal treatments hybrid fluid coolers may be less than 50% of the conventional cooling tower system. Air - water heat exchanger and the number of business units using variable speed fans depends on the process of cooling requirements.
Thermal treatments hybrid fluid coolers in many years, in warm weather, can provide 85 ° F water temperature - just like using systems traditional evaporative cooling tower. In cool weather, cool water temperature of 46 ° F may not use ethylene glycol.
Energy saving
In hot weather days, increasing the relative humidity of the ambient air by spraying air into the data stream of units on both sides of the city water atomized fine mist. Care of thermal insulation systems reduce the air temperature when it enters the unit and compared with the results achieved when only one cooling tower, the water temperature in the lower left.
You can run in the process water temperature is low enough, heat treatments hybrid fluid coolers, it may not actually use the operating equipment new central chilling unit - which is free to make your process cooling.
Consumption saved
Using less water than traditional cooling process evaporative cooling tower system. Closed loop heat treatments mixed fluid cooler, so there is no need to replace the water evaporation process. Using less water, preserves precious natural resources. In addition, the process water clean and uncontaminated - without the need for treatment scale or bacteria.
Unique "V" design-angle side also means no moisture accumulation in the unit under the floor.
Save on maintenance
No wet filter needs to be replaced, add any chemicals or other cooling systems require frequent cleaning tower basin. Closed hybrid cooling tower run 24/7, with a minimum of maintenance or repair.
In addition to the installation and expansion
Mixed fluid cooler is designed to be used outdoors. Maximizing the air circulation through the coil is minimized, and the footprint of each unit. The unit is modular, easy to install and can complement other units at any time, there is need to expand the cooling capacity.